Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Hanging Graduated Tool Shelf
A 100 x 60 mm L-shaped tool shelf, part of the 'Printed French Cleat Bin Wall' kit. It bolts to one Cleat Bin Hanger Bracket with two M3x12 socket head cap screws, which pass through 3.4 mm holes at 15 and 45 mm on its 4 mm back plate and thread into the hanger's captured M3 nuts. The 6 mm deck has seven 9 mm screwdriver and awl holes at 12 mm pitch and five 14 mm plier and marker holes at 20 mm pitch. Two 5 mm gussets brace the deck.
French Cleat Bar Clamp Rack Arm
A cantilever storage arm that drops onto a standard 45-degree French cleat ripped from 3/4 in (19 mm) plywood, sized to hang F-clamps and bar clamps by their bars — the arm reaches 92 mm past the cleat face, rises 7 mm toward the tip and ends in a 16 mm upturned lip so clamps slide back instead of walking off. It is 112 x 72 x 15 mm and prints on its side, so the bending load at the arm root runs along the layer plane, and a 4.5 mm cross bore through the 9 mm back plate takes a #8 wood screw or M4 bolt into the cleat board to lock it against lift-off.