Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Bungee Cord Seven-Peg Wall Rail
A 160 x 42 x 44 mm wall rail with seven pegs on 22 mm centres. Each peg has a 9 mm flat seat and an 8 mm lip, so a bungee cord's steel hook drops on and stays put instead of ending up in a tangle in a bucket. It mounts with three #8 pan-head or washer-head wood screws through 4.8 mm holes. Each peg is printed as a 6 mm upright fin, so the hanging load runs along the layers and can't peel them apart.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Ratchet Strap Drill Winder Spool
A spool that winds loose ratchet straps and tie-downs into a tidy coil instead of a tangled ball: thread the strap tail through the two 3.6 mm slots in the drum and spin it. The 88 mm flanges and 54 mm clear drum take a 2 in (50 mm) strap, the Ø16 mm spindle has a 6.7 mm across-flats socket for a 1/4 in hex bit so a cordless drill does the winding, and an 8.3 mm cross hole takes an 8 mm rod or screwdriver shank as a hand crank.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.