Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pinch-Bolt 1/2 in EMT Rail Parts Bin
A 90 x 60 x 50 mm open parts bin with a 45° V-roof hook that hangs over a 1/2 in EMT conduit rail (17.9 mm OD) above a bench. One M4 x 35 bolt goes through 4.5 mm holes in the bin's rear pillar and the flexing back leg and pinches the rail, so the bin can't rock forward when it's loaded and you can slide it anywhere along the rail. The rail needs at least 25 mm of wall standoff to clear the 3 mm back leg.
Locking-Peg Pegboard Small Bin
A two-column open-top parts bin, 50.0 W x 65 D x 70 H, that is part of the '1/4 in Pegboard Locking-Peg Tool Wall' kit. It hangs on two of the kit's printed octagonal hook pegs and is held by two split, ridged lock pins in standard 1/4 in pegboard (6.35 mm holes on a 25.4 mm grid). The 5 mm back plate has 5.8 mm octagon sockets at X ±12.7 mm, with the hook row at Z 62 and the lock row 25.4 mm below it, so a bump won't lift the bin off the board.