Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Mast Pipe Enclosure Saddle Clamp
A 72 x 80 mm mounting plate with two 90-degree V-jaw ribs spaced 50 mm apart that cradle a 20–48 mm OD mast pipe (3/4 in to 1-1/2 in conduit or fence rail) and pull it in with two standard 12.7 mm stainless worm-drive hose clamps threaded through the moulded band tunnels. The V-groove plus the 50 mm rib spacing stops the wind-twist you get from U-bolts alone; the plate carries four M4 clearance holes on a 56 x 40 mm pattern for a junction box or printed LoRa/solar node enclosure and an 18 mm centre pass-through for a cable gland or drainage.
Telescopic Mast Guy Ring Plate
A non-conductive three-point guy ring for fibreglass telescopic antenna masts: the 19° tapered bore self-seats anywhere the mast measures 32–50 mm OD, and three 122 mm-span arms each carry a pair of 8 mm line holes so a 3–4 mm guy line reeves through the outer eye and the tail wraps figure-8 around the 6 mm bridge — no cleat needed. A radial 3.4 mm boss takes an M4 nylon set screw to stop the ring creeping up, keeping every part of the assembly metal-free next to the radiator.