Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
2x2 Deck Baluster Repair Shoe
A screw-down socket shoe that re-secures a loose or rot-damaged 2x2 wood deck baluster (1-1/2 in = 38 mm square) to the top of a 2x4 bottom rail or tread without tearing out the railing section. It has a 39 mm square cup 22 mm deep, drain notches so water can't pool, #6 cross-screw holes (4.0 mm) through both wall pairs, and a 92 x 47 mm gusseted flange with four counterbored 4.8 mm holes for #8 or #10 deck screws.
EMT String Light Mast Bracket
A two-saddle wall bracket that carries a 3/4" EMT conduit mast (23.4 mm OD, 23.7 mm slip bore) flat against a deck post, 4x4 or fence rail for hanging café/string lights. 148 x 50 x 42 mm plate with six 5.5 mm holes for #10 wood screws (4.8 mm shank) or M5 bolts, saddle centres 104 mm apart, and an M5 pinch bolt with a captive 8 mm hex-nut pocket in the upper ear to lock the mast against sliding or spinning; the 18 mm throat is narrower than the conduit so the mast is threaded down through both cradles and stays captured.