Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
3/4 in PVC Poultry Waterer Pipe Hanger
This screw-on hanger clamps a 3/4 in Schedule 40 PVC nipple-waterer pipe (26.7 mm OD) to a coop post or run frame. An M4 pinch bolt with a captive nut stops the pipe from rolling, so the nipples keep pointing straight down and don't drip. Vertical 5.2 mm slots fit #8 or #10 screws (4.2–4.8 mm shank) and give 5 mm of height adjustment for levelling the line. The part measures 62 x 80 x 16 mm and the pipe weight loads it along the layer plane.
1 in PVC Snap-In Fence Standoff Clip
Snap-in saddle clip for 1 in schedule 40 PVC (33.4 mm OD). The pipe pushes through a 28 mm mouth into a 33.6 mm cradle, and the clip holds it 12 mm off a fence, post or wall so wood can dry behind the run. It suits irrigation, solar conduit and garden hoop runs. The 70 x 20 mm foot takes two #10 wood screws (5.3 mm clearance holes on 56 mm centres), and the ring prints flat so any pull on the pipe goes along the layers.