Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
EMT String Light Mast Bracket
A two-saddle wall bracket that carries a 3/4" EMT conduit mast (23.4 mm OD, 23.7 mm slip bore) flat against a deck post, 4x4 or fence rail for hanging café/string lights. 148 x 50 x 42 mm plate with six 5.5 mm holes for #10 wood screws (4.8 mm shank) or M5 bolts, saddle centres 104 mm apart, and an M5 pinch bolt with a captive 8 mm hex-nut pocket in the upper ear to lock the mast against sliding or spinning; the 18 mm throat is narrower than the conduit so the mast is threaded down through both cradles and stays captured.
4x4 Post Cap String Light Hooks
A weather cap for a nominal 4x4 fence or deck post (88.9 mm actual) with a 91 mm square socket, 20 mm engagement and two M4 clearance holes so it screws down and won't blow off. Twin horns on opposite faces carry a cafe-string-light cable in an 8 mm wide, 10 mm deep slot; overall 127 x 97 x 50 mm with a hollow 50-degree pyramid roof that sheds water and prints support-free.