Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
1590B-Size Printed Stomp Box Enclosure
A guitar pedal enclosure with the same 112 x 60 x 31 mm outside size as a Hammond 1590B. The walls are 2.5 mm thick and the top is 3 mm. Each corner has a boss with a 4.0 mm bore for an M3 brass heat-set insert, so you can screw on a flat aluminium or printed base plate. The 3 mm pilot holes mark a footswitch, three pots, an LED, in/out jacks and a DC jack. Step-drill each one to fit your parts, so you don't pay for an $8–15 metal box just to hold a perfboard build.
3PDT Footswitch Toe Fence Guard
A toe-fence guard plate that clamps under the nut of a 3PDT stompbox footswitch (12.7 mm bushing hole, 23 mm nut recess, 2 mm clamp floor). A 32 mm braced fence in front keeps a stray foot from hitting the switch or neighbouring knobs. Two optional M3 clearance holes (3.4 mm, 38 mm apart) let you screw it down so it can't rotate. The plate is 50 x 38 mm.
Underboard Pedal PSU Strap Hanger
A 130 x 60 mm plate that screws to the underside of a pedalboard with four slotted #6 wood-screw holes. A 20 mm hook-and-loop strap runs through two 23 x 3.5 mm tunnels to hold any daisy-chain or isolated pedal power brick up to about 100 mm long. Raised ribs keep the brick 5 mm off the plate for airflow, clear the screw heads and stop the brick rattling loose.
Chicken-Head Set-Screw Pot Knob
A classic chicken-head pointer knob for amp, guitar-pedal and bench-supply potentiometers. It is 34 mm long and 18 mm tall. The 6.5 mm bore fits both 6 mm and 1/4 in (6.35 mm) round, knurled or D shafts, and a radial M3 brass heat-set insert (4.0 mm bore) takes a set screw to clamp the shaft. There is an engraved indicator line on the 3 mm pointer skirt.