Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Euro Hinge Mounting Plate Drill Template
Fence-located drill template for Euro / Blum-style clip mounting plates. It puts two 3.4 mm guide bores 32 mm apart at the standard 37 mm setback from the cabinet's front edge, with V-notches that line up on your hinge centreline pencil mark. The 10 mm-long guides keep a 3 mm or 1/8 in pilot bit square, so you get matching pilot holes in every carcass side when re-hanging, shimming or swapping kitchen doors. Overall 66 x 70 x 22 mm.
Hairpin Desk Leg Stripped-Screw Repair Plate
Fixes a hairpin or plate-mount desk leg whose wood screws have stripped out of the tabletop. The 110 x 110 x 7 mm plate goes on fresh wood with eight #8 wood screws (4.8 mm holes) set on tabs 144 mm across, clear of the old holes. The leg's steel plate then bolts on with M4 bolts and nuts that slide in four diagonal nut tracks (7.4 mm wide), so any hole pattern from about 3 in to 4.5 in square fits.
2020 Slot-Keyed M3 Grid Adapter Plate
An 84 x 64 x 6 mm adapter plate that bolts to 2020 extrusion with two M5 T-nuts. A 5.6 mm key sits in the 6 mm T-slot so the plate stays square to the rail. It has a 20-hole M3 grid (4.0 mm bores for heat-set inserts, 10 mm pitch), so sensors, boards and brackets with any M3 pattern on that grid can be mounted without drilling the extrusion.