Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
7/8/9 mm Push-Pin Trim Rivet Sprue
A snap-off sprue with three two-piece push-pin trim rivets, the barrel-and-pin kind used on Honda, Toyota and VW door cards, splash shields and dash panels. Each barrel has a split shank: 6.7, 7.7 and 8.7 mm OD with a 0.55 mm barb, sized for 7, 8 and 9 mm panel holes. Its heads are 18, 20 and 22 mm across, the grip length is about 10 mm, and a matching 4.2, 5.2 or 6.2 mm pin pushes in to spread and lock the legs. Measure your panel hole with calipers and use the rivet one size up from the hole.
Furnace Filter Swing-Aside Spring Retainer Clip
A 16 mm wide flex-finger clip that screws next to a furnace or return-air filter slot with one #8 or M4 screw (4.5 mm hole). It holds filters up to 24 mm thick (standard 1" nominal) with a sprung pressure nub, and the lift lip at the tip lets you flick it aside without tools when you swap the filter. It replaces the lost or broken sheet-metal turn-buttons on filter doors. The finger flexes in the layer plane, so it won't split along layer lines. Overall size is 70 x 32 x 16 mm.
Storm Door Insert Two-Reach Turn Button
A replacement turn button for the swing clips that hold glass or screen inserts in aluminum storm doors and windows. It is 56 x 16 mm and pivots on a #6/#8 or M4 screw through a countersunk 4.5 mm hole. The two arms reach different depths, 2 mm and 5 mm above the frame face. Turn whichever arm matches your insert onto the panel, and the chamfered edges ride up onto the panel as you turn it. No discontinued OEM clip is needed.