Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Bar Load Cell Riser Mount With Overload Stop
This is a cantilever base for the bar-type strain-gauge load cells used with HX711 boards. A 40 x 30 mm riser holds the fixed end 20 mm above a 110 x 50 mm plate. Its 5.5 mm slot, with a hex-nut track underneath, takes M4 or M5 bolts in a 15–26 mm pattern, so you don't need a matching bracket. Under the free end is an M4 heat-set overload-stop post: a screw in it sets the gap so a dropped weight can't over-bend the cell. The plate fixes down with four 4.5 mm (M4 / #8) holes.
Bathroom Scale Split-Stem Replacement Foot
Replacement foot for bathroom scales that have lost a foot. It is a 32 mm round pad with a split, barbed stem (11.5 to 9.5 mm barbs) that snaps into the scale's empty socket. An optional M4 screw can go in from below to lock it. A 26.4 x 1 mm recess underneath takes a 25 mm felt or rubber bumper. Overall height is 26 mm.