Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Oven Rack Push-Pull Hook Stick
A flat 170 x 30 x 8 mm stick for sliding a hot oven rack out or back in. The 7 mm side notch hooks the front wire to pull the rack, and the V notch in the tip pushes it home. It works on the usual 4–6 mm rack wire and keeps your knuckles away from the heating element. An 8 mm hole lets it hang on a hook, and the long slot keeps it light. Print it flat in PETG or ASA rather than PLA, since it will touch hot steel.
Ginger And Garlic Pyramid Grater Plate
This is a 145 x 70 mm grating plate in the style of a ceramic ginger grater. The 72 x 52 mm field has 234 square pyramid teeth on a 4 mm pitch, each 2.4 mm tall, for grating ginger, garlic, nutmeg and citrus zest. A 7 mm rim around a moat holds the juice, a low notch lets you pour it off, and the grip tab has a 10 mm hole for hanging on a hook.
Rim-Hook Egg Yolk Separator
An egg separator that hooks onto the rim of a mixing bowl, so you can crack eggs with both hands free. The cup is 64 mm across with a 34 mm flat floor that holds the yolk, and ten 3 mm drain slots let the white fall into the bowl. A 75 mm T-beam handle has two 9 mm notches underneath, so it hangs on bowl or measuring-jug rims up to 8 mm thick.
Twin-Notch Stovetop Spoon Rest
A 140 x 90 mm stovetop spoon rest with two separate drip wells, 12 mm deep. At the back is a 30 mm tall upright with two 16 mm U-notches, so two spoons, ladles or spatulas can rest by their handles with the heads down in the wells. Sauce drips into the well instead of onto the hob, and the divider keeps tomato and custard spoons apart.