Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Cube Tissue Box Wall Cradle
A screw-to-the-wall cradle for a standard cube tissue box. It replaces a cracked acrylic holder or a box that keeps sliding off the vanity. Box size isn't standardised, so measure yours: the pocket is 122 mm wide and 120 mm deep, sized for cube boxes up to about 120 mm square. The open sides and the 80 mm hole in the floor let you push the box up and out. Two 4.5 mm holes, 80 mm apart, take #8 or M4 screws. The part is 128 x 126 x 70 mm.
Shower Arm Clamp-On Handheld Shower Cradle
A tapered cradle for a handheld shower head that clamps onto a straight, horizontal 1/2 in shower arm (21.3 mm OD, 22 mm bore), so you don't need to drill the tile. The cone tapers from 19 to 31 mm ID to fit most handles, a 16 mm front slot lets the hose slip in, and one M4 x 30 screw and nut pinch the clamp tight. Slide it onto the arm before you screw the diverter back on.
Bathroom Scale Wall Storage Cradle
A wall-mounted cradle that holds a bathroom scale upright on its edge, off the floor. It fits any scale up to 32 mm thick in a 34 mm wide channel with a 22 mm retaining lip. Screw two cradles to the wall about 150–250 mm apart with #8 wood screws: the 4.8 mm clearance holes are countersunk so the heads sit flush. The part is 45 × 99 × 40 mm, with a braced, lightened gusset under the floor. It prints on its side, so the scale's weight loads it along the layers, not across them.