Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Tension Pole Caddy Replacement Shelf
A 120 x 90 mm draining shower shelf that replaces a cracked or lost tray on a corner tension-pole shower caddy. Instead of a moulded collar sized to one pole, it has a 90° V-saddle that seats any pole from 22 to 30 mm. Two worm-drive hose clamps (bands up to 12.7 mm wide) run through 14 x 3.2 mm tunnels in the 62 mm tall clamp block and hold it in place. The floor has drain slots, two gussets carry the shelf load into the clamp block, and the front lip is lowered so bottles lift out easily.
Heated Towel Rail V-Block Wall Bracket
A wall standoff bracket for ladder-style heated towel rails whose own clip has snapped. A 90° V-block self-centres any upright tube from 20 to 32 mm diameter, and a worm-drive hose clamp or heavy zip tie (bands up to 14 mm wide) through the slot behind the V pulls the tube tight. The bracket holds the tube centre 59–68 mm off the wall, is 70 x 57.5 x 32 mm, and screws up with four #8/#10 or M5 wood screws through 5.5 mm holes. Electric rails run warm, so print it in PETG or ASA rather than PLA.