Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Slotted-Screw 4-1/4 in Shower Drain Grate
A 108 mm (4-1/4 in) screw-down replacement grate for round shower drains whose original strainer has corroded or gone missing. The two 4.6 mm radial slots take the drain's existing pair of screws anywhere from 70 to 90 mm apart, so you don't need to know the exact spacing. A 9 mm counterbore sinks the heads below the surface, the 3 mm slots catch hair, and the 4 mm plate has a chamfered edge.
Linear Shower Drain Sprung Hair Trap Tray
This hair-catcher tray drops into the channel of a linear tile-insert shower drain and sits under the grate. Leaf-spring fins on both sides compress, so one tray wedges into any channel from about 38 to 50 mm wide. That means you don't need the brand-matched OEM insert. The tray is 150 x 30 mm with 10 mm walls. A floor of 2 mm slots on a 5 mm pitch lets water through and catches hair, and a tab with a 6 mm hole at one end lets you hook the tray out to rinse it.