Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Three-Size Tile Drill Guide With Water Cups
A 120 x 50 mm drill guide that you tape to glazed wall tile so the bit doesn't skid when you drill holes for towel bars, grab-bar anchors, shower caddies or toilet-roll holders. It has three 22 mm tall guide towers for 6, 8 and 10 mm tile or glass bits (bores 6.3, 8.3 and 10.3 mm). Each tower has a water cup on top that drips coolant down the bore to the bit tip, and V-notches on both edges line each tower up with your pencil crosshair.
Tub And Tile Caulk Tool
A one-piece 100 x 50 x 10 mm caulk finishing and removal tool for re-sealing a tub, shower pan or vanity backsplash: its four working corners are rounded to 5, 8, 12 and 16 mm so each one lays a matching concave silicone fillet while the two adjacent flats ride the walls of the 90° joint. The opposite side carries a 26 mm wide scraper blade tapered to a 1.8 mm plastic-razor edge for lifting old silicone off tile without scratching it, a narrow rake point for digging the joint out, and a 4.5 mm hole for an M4 screw or nail to hang it.