Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Twelve-Slot T-Shank Jigsaw Blade Block
A two-tier bench block that holds 12 T-shank jigsaw blades upright with their teeth showing, so you can grab the right blade without digging through a pile of cardboard sleeves. It is 110 x 44 x 32 mm and has two staggered rows of six 2.4 x 11 mm slots, 12 mm deep. The slots fit common blades from about 1.3 mm thick and up to about 10 mm wide at the shank, and the rear tier is hollowed out underneath to save plastic.
Flagged: a sharp edge or blade. Not for safety-critical use without independent engineering review.
Test Lead And Clip Wall Rack
A 150 mm wide wall rack with ten 5.2 mm drop-in slots. Each slot takes a meter lead or patch lead with wire up to about 5 mm OD, and the banana plug or probe body rests on top so the leads hang straight and don't tangle. A 3 mm clip rail along the top holds alligator and hook clips. Two gussets and the center rib brace the 40 mm deep shelf. Mount it with two #8 wood screws or M4 bolts through the 4.6 mm holes, which are 90 mm apart.