Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Flexure Hose Pinch-Off Clamp M5
This one-piece flexure clamp pinches a coolant, fuel or vacuum hose shut while you swap a hose clamp or a part. The two smooth jaws are 8 x 14 mm and have 88 mm of usable length, enough for hoses up to about 45 mm OD laid flat. One M5 x 40 bolt runs through 5.5 mm holes and threads into a captured M5 hex nut pocket to close the 10 mm jaw gap, and a 2.5 mm living-hinge loop opens the jaws again when you loosen the bolt.
Flagged: automotive electrical. Not for safety-critical use without independent engineering review.
Worm-Drive Hose Clamp Standoff Saddle
A screw-down V-saddle that raises a coolant, fuel, vacuum or bilge hose (about 15–40 mm OD) 18 mm off a vibrating firewall or hull. A standard worm-drive band clamp up to 13 mm wide, or a zip tie, passes through a 14 x 3 mm tunnel and wraps over the hose, so the clamp holds the hose in the saddle and never rubs on the panel. The base is 90 x 28 mm with two 5.5 mm holes for M5 or #10 screws.
Flagged: automotive electrical. Not for safety-critical use without independent engineering review.
Hose Clamp Size Sorting Tower
A stepped cone that sorts a jumbled bag of worm-drive hose clamps by size — drop each clamp over the top and it hangs on the first shelf too wide for it. Eight tiers at 64, 56, 48, 40, 34, 28, 22 and 16 mm diameter over an 84 mm tall tower, on an 82 mm flange with three 4.5 mm M4 clearance holes to bolt it to a bench or pegboard shelf. Hollow conical core keeps it to about 45 cm³ of plastic.
4 in Dust Hose Cam Lever Cuff
One-hand quick clamp for nominal 4 in flexible dust hose and tool ports: a 104 mm ID, 20 mm tall band with a 2.4 mm flexing wall and a print-in-place cam lever that draws the ears ~4 mm together, so it grips hose measuring 100–107 mm OD without a screwdriver. Replaces an expensive large-diameter worm clamp that kinks thin-wall hose; the spiral cam slot detents at the closed position and the lever pivots on a captured 5 mm pin.