Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
PVC And EMT Offcut Socket Wall Rack
This wall rack has five upright sockets that keep short pipe offcuts sorted by size: 1 in (33.4 mm OD), 3/4 in (26.7 mm) and 1/2 in (21.3 mm) schedule 40 PVC, plus 3/4 in (23.4 mm) and 1/2 in (17.9 mm) EMT conduit. Each 36 mm deep socket is 1.5 mm over the pipe's OD and has a drain hole in the floor. The 156 x 52 mm back plate takes two #8 wood screws.
1/2 in PVC Burst Pipe Bolt-On Repair Clamp
This is one half of a bolt-together emergency repair clamp for split 1/2 in schedule 40 PVC (21.3 mm OD). Print two halves, wrap the leak in a 1.5 mm rubber strip (inner tube works), and close the 60 x 50 x 15 mm shells with four M5 bolts. The bolts pass through 5.5 mm holes and the nuts drop into 8.4 mm hex pockets. The 24.4 mm saddle sits 0.6 mm proud of the split face, which leaves a 1.2 mm squeeze gap so the bolts keep the gasket compressed until the proper fix.