Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Snowblower Shear Bolt Spare Keeper
A 96 x 28 mm keeper that zip-ties into a 90° V-saddle on a snowblower or mower handle tube (fits roughly 16–35 mm OD) and holds four spare shear bolts with their nuts. Each wing has one 6.8 mm hole for 1/4 in or M6 bolts and one 8.6 mm hole for 5/16 in or M8 bolts, so the spares stay on the machine instead of getting lost in a drawer.
Recoil Starter Pull Handle
Replacement T-handle for the recoil pull starter on a mower, snowblower, generator or pressure washer, for when the original cracks or you re-rope the machine. A 92 mm bar (24 x 20 mm section) carries a 5.5 mm rope bore with a flared conical mouth for 3-5 mm (#3-#5) starter cord, a 15 x 13 mm knot chamber that opens to the build plate so you can tie a figure-8 and pull it in, four 20 mm-spaced finger grooves, and a tapered 7 to 2.2 mm slot at one end that jams the rope to hold the starter extended while you service the deck.