Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Wheelbarrow Tub Support Wedge Block
A replacement for the plastic wedge that sits between a wheelbarrow tub and its handle rail. It is 90 x 40 mm and tapers from 18 to 38 mm tall (a 12.5° pitch). Underneath is a 26 mm wide 90° V-saddle that seats on round steel handle tubes about 25–40 mm across or on the edges of a wooden rail. The through-slot is 6.8 x 20.8 mm, so a 1/4 in or M6 tub bolt lines up even when the original hole spacing varies. The ribbed top has open pockets to save material.
Video Doorbell 30 Degree Wedge
A 30° horizontal-aim wedge that sits between a video doorbell or small security camera and the wall, swinging the field of view across an offset walkway or corner entry — 46 mm wide, 84 mm tall, tapering from 5.2 mm to 31.8 mm deep. Six 4.5 mm through-holes on the centreline (M4 or #6 screws) give nine bracket spacings from 28 to 68 mm, a 26 x 16 mm pass-through carries the bell wires, and the hollow shell is symmetric so flipping it end-for-end aims the other direction.