Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Swing-Arm Mirror M5 Clevis Wall Pivot
A replacement wall pivot for extendable bathroom magnifying mirrors whose original wall knuckle has cracked or worn loose. The 60 x 96 mm plate fixes with four countersunk #8 screws on a 40 x 76 mm pattern. Two gusseted clevis ears leave a 14 mm gap for the arm's end eye, which you ream to 5.5 mm. An M5 x 35 bolt runs through the ears into a captured nut, and you tighten it to set the swing friction. The pivot sits 20 mm off the wall, so the arm can swing through 180°.
Framed Shower Door Bottom Pivot Block
Replacement bottom pivot block for framed pivot shower doors whose nylon original has cracked and been discontinued. The tongue slides into the aluminium stile channel (default 22 x 12 mm, set at the top of the script), a 30 x 14 mm shoulder stops on the stile end and carries the door weight, and a 14 mm pin block below takes a 5 mm steel rod in a 5.3 mm bore held by an M3 set screw, with the pin offset from the channel centre adjustable (default 6 mm). Two 3.4 mm M4 self-tap holes through the tongue let the original frame screw go through either the face or the side of the stile; overall 49 mm long.