Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
1/2 in EMT Pot Rail Wall End Bracket
Wall end bracket that holds a 1/2 in EMT conduit pot rail (17.9 mm OD, 18.4 mm socket, 20 mm deep) 55 mm off the wall, so pots and pans hang clear of the backsplash. It mounts with two #8 wood screws, has a braced gusset to carry the weight of heavy pans, and an M4 self-tapping set screw stops the rail from turning. Print a pair, one for each end of the rail.
Snap-On Pot Rail Hook For 1/2 in EMT
A snap-on S-hook for a DIY kitchen pot rail made from 1/2 in EMT conduit (17.9 mm OD). The 18.3 mm ring clicks over the tube through a 16.5 mm mouth and slides freely along the rail. A 16 mm deep J-hook at the bottom holds pot handles, mugs and utensils. It prints flat and 8 mm thick, so the hanging load runs along the layers instead of across them. It measures about 37 x 87 x 8 mm.