Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Deep Drawer Dish Peg Tile For 1/2 in PVC
A 150 x 150 mm tile with nine sockets on a 50 mm grid. Offcuts of 1/2 in schedule 40 PVC pipe (21.3 mm OD) push into the sockets and work as pegs, so you get the adjustable plate-and-bowl peg board for deep kitchen drawers without buying the kit. Each 22.4 mm socket has crush ribs that grip the pipe, a lead-in chamfer and a crumb drain hole, and dovetail tabs let you lock tiles together to fill any drawer.
Pour-Over Dripper Stand For 1/2 in PVC
A 140 mm tripod head for a pour-over coffee stand. It has three 21.7 mm sockets, 26 mm deep, for 1/2 in schedule 40 PVC legs (21.3 mm OD), and a 70 mm drip-through opening sized for cone drippers whose base flange is wider than 75 mm. Cut the three legs to whatever height fits your mug, carafe or scale.
1/2 in PVC Mug Tree Six-Peg Hub
This hub turns a length of 1/2 in Schedule 40 PVC (21.3 mm OD, 21.7 mm slip bore) and six 8 mm dowels into a countertop or under-shelf mug tree. Each dowel sits in an 8.3 mm socket 18 mm deep, angled up at 45°. An M4 heat-set insert takes a thumb screw that locks the hub at any height on the mast. The hub is 66 mm across and 32 mm tall, and you can stack two hubs turned 30° apart to hang 12 mugs.