Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Four-Radius Cast Iron Pan Scraper
This is a 90 x 70 mm pan scraper for cast iron and stainless cookware. The bottom 1.2 mm stays straight and the edge then bevels in to a 6 mm grip ring. One long straight edge cleans flat pan bottoms. The four corners have 2, 8, 16 and 28 mm radii, so the right one fits a grill-pan groove, a saucepan corner, a skillet wall or a dutch oven, and you can scrape stuck food off without steel wool. There is a 22 mm finger hole and a 7 mm hang hole. Use it only once the pan has cooled to warm (PLA softens around 60 °C), or order it in PETG.
Cast Iron Skillet Handle-Hole Wall Hook
A gusseted wall hook for hanging a cast iron skillet or griddle by its handle hole. The tip is 14 x 12 mm, so it goes through any handle hole at least 15 mm across. The arm gives 56 mm of reach and ends in a 12 mm up-lip that keeps the pan from sliding off. The hook prints on its side, so the pan's weight bends it along the layers rather than across them. It mounts through the 90 mm tall back plate with two #8 (4.2 mm) pan-head wood screws in 5 mm clearance holes.