Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Under-Cabinet Screw-On Banana Hook
This hook screws under a kitchen cabinet so bananas hang in the air instead of bruising on the counter. The 92 mm flange takes two #8 wood screws (4.2 mm shank) through 4.6 mm holes set 80 mm apart. A gusseted 8 x 20 mm stem drops the 22 mm hook throat 80 mm below the cabinet, and the part prints on its side so the load runs along the layers.
Under-Cabinet Three-Mug Hook Rail
A 150 mm rail that screws to the underside of a kitchen cabinet or shelf with two #8 wood screws (4.5 mm clearance holes, 50 mm apart). It hangs three mugs on J-hooks set 50 mm apart, each with a 14 mm handle gap. It prints on its side, so the mug load pulls along the layers and doesn't split them apart, and gussets at each hook root stop the hooks from snapping off.
Under-Cabinet Paper Towel PVC Spindle Hanger
A pair of these hangers screws under a kitchen cabinet with two #8 wood screws each (4.8 mm holes, 66 mm apart). They hold a length of 1/2" schedule 40 PVC pipe (21.3 mm OD, which sits in a 22 mm open cradle) as a paper towel spindle. The spindle axis is 85 mm below the cabinet, which leaves room for rolls up to about 150 mm across. The hanger prints flat, 82 x 108 x 14 mm, so the weight of the roll pulls along the layers instead of across them. Print two and cut the pipe about 20 mm longer than your roll.
Under-Cabinet Jar Lid Opener
A 130 x 92 mm plate that screws to the underside of a kitchen cabinet with four #8/M4 wood screws (4.5 mm clearance holes, 9 mm counterbores); push a jar up into a sawtooth V-jaw and twist the jar to break the lid loose one-handed. The large 80-degree V with 7 mm teeth grips lids from about 30 to 89 mm, the small V with 4.5 mm teeth handles 12 to 50 mm bottle and sauce caps, both with 17 mm of jaw depth below the plate.
Under-Shelf Stemware Glass Rack
A 150 x 78 mm rack that screws to the underside of a cabinet or shelf and hangs two stemmed glasses by their feet. Twin 13 mm slots on a 76 mm pitch take stems from flutes to Bordeaux, flared mouths guide the stem in and snap detents keep glasses from sliding out; four 10 mm standoff posts leave the gap the glass foot slides through, with 4.5 mm screw holes counterbored flush so nothing scratches the foot.